CROMAR GRP PRO25 TOP COAT 20KG

All cans must be fully shaken or stirred before use, if separate cans are being used, mix together to avoid any colour variations between batches. Preparation: Before applying ProGRP Topcoat it will be necessary to lightly sand the whole of the roof surface, corners and details. Smooth, unblemished surfaces will produce a high quality finish when top coated. After the roof has been sanded an Acetone wipe will aid adhesion of the final topcoat. using a sanding pad or sandpaper lightly sand the corners taking care not to create any holes. Top coating: Calculate the amount of topcoat required, measure out into a bucket and add catalyst to each batch of topcoat as you need it. Stir well for at least 1 minute. Apply to the roof surface starting at the furthest point from the exit point on the roof and using the relevant sized soft application roller. The topcoat applied should allow the fibre pattern of the laminate to still be visible after application. Non-Slip Finish: If a non-slip finish is required, a grit or slate chippings can be sprinkled on to the topcoat, this should be added by hand or a dispenser as the roof is top coated. For a neat finish use masking tape or battens to define the edges of the aggregated areas. Cromar ProGRP is a Glass Reinforced Polyester flat roof system designed and engineered for flat roof applications. ProGRP is a fully integrated all in one system where the components work together on virtually all types of flat roofs and vertical surfaces in any domestic or commercial application to provide the perfect all weather protection.